ADI:Boost Precision and Accuracy with Single Chip Capacitance- and Impedance-to-Digital Converters
A look at overcoming design barriers with new converter architectures.
2020-04-26 15:18:40A look at overcoming design barriers with new converter architectures.
2020-04-26 15:18:40While amplitude response is generally of greater interest than phase response, sometimes the phase response of the filter is important.
2020-04-26 15:18:28A discussion about using components with lower intermodulation distortion and lower noise in modern digital radio transmitter design.
2020-04-26 15:18:26A look at two advances in digital isolation technology that are yielding new capabilities to greatly simplify designers’ jobs.
2020-04-26 15:18:23The vastly complex arena of analog design
2020-04-26 15:18:19A look at an alternative method to measure junction temperature using an on-chip output stage protection diode as a temperature sensor.
2020-04-26 15:18:19Some thoughts on characterizing network frequency response rapidly, with minimal effort and available tools.
2020-04-26 15:17:55A look at the challenges found with single-supply op-amp applications.
2020-04-26 15:17:49A look at the challenges such as of thick molding compounds, noisy environments, reliability concerns, and long interconnect distances from sensor to IC.
2020-04-26 15:17:45Using a touch to change to activate a switch is well understood, but making a PCB sensor design with proper shielding and routing can be a challenge.
2020-04-26 15:17:44A discussion about improving battery life through enhancing the efficiency of the power system.
2020-04-26 15:17:19How to measure the temperature of the PCB.
2020-04-26 15:17:13A look at hot swapping: the process of removing and replacing a board or module while the system remains up and running.
2020-04-26 15:17:13A discussion of how high-speed amplifiers can be less expensive than traditional clock buffers in consumer electronic applications.
2020-04-26 15:17:06A discussion about the need to compensate for errors from the DAC and other components in the signal chain in order to get an accurate output voltage.
2020-04-26 15:17:03A look at sensors used in the design biometric identification devices.
2020-04-26 15:16:46Questions and answers highlighting the design of an ADC front end using amplifier and transformer circuitry.
2020-04-26 15:16:43A look at the linear variable differential transformer (LVDT) for measuring linear distance in modern machine-tools, robotics, avionics, and manufacturing.
2020-04-26 15:16:33A look at a system to provide rapid, automated information on patient clotting status—improving patient safety, workflow, and decision support.
2020-04-26 15:16:20Can you answer this question about op amps and bandwidth?
2020-04-26 15:16:14