ADI:ADI公司测量工程“更上一层楼”的挑战
多年来,“更上一层楼”一直隐含在ADI公司战略中,但最近,由于专注于提供更多解决方案,这一战略已变得明确。追根溯源,曾经我们仅提供分立器件和数据手册
2020-04-26 15:39:23多年来,“更上一层楼”一直隐含在ADI公司战略中,但最近,由于专注于提供更多解决方案,这一战略已变得明确。追根溯源,曾经我们仅提供分立器件和数据手册
2020-04-26 15:39:23The AD4000 ADC family unique combination of high-Z mode, reduced input current and longer acquisition phase enables ease of drive and help designers eliminate dedicated high-speed ADC driver stage, sa
2020-04-26 15:38:35在许多恶劣环境系统中,一个不断增长的趋势是高精密电子器件离高温区域越来越近。这一趋势背后有多个推动因素,在能源勘探、航空航天、汽车、重工业和其他终端应用中都有体现。
2020-04-26 15:37:42A look at the importance of optimally managing ramp timing.
2020-04-26 15:19:16A discussion around closing the gap between good sensor technology and its implementation within critical industrial systems.
2020-04-26 15:19:06A look at the dual challenges of providing the highest sensitivity amplifiers possible and making them operable under severe overload conditions.
2020-04-26 15:19:02In order to make the best use of the increased resolution, effective and rapid autofocus (AF) must accompany the increase in pixels.
2020-04-26 15:18:46A look at hot swapping: the process of removing and replacing a board or module while the system remains up and running.
2020-04-26 15:17:13A discussion of how high-speed amplifiers can be less expensive than traditional clock buffers in consumer electronic applications.
2020-04-26 15:17:06Insight and advice from an engineer’s 25 years of experience. Incorporating even a few of these could help improve your results.
2020-04-26 15:16:11Why accurate high-side current sensing is necessary in many applications, including motor control, solenoid control, and power.
2020-04-26 15:16:04A look into the mysterious errors in instruments generated by high frequency common mode (HFCM).
2020-04-26 15:15:10有源滤波器的相位响应第二部分:低通和高通响应
2020-04-26 15:13:47高速差分 ADC 驱动器设计指南
2020-04-26 15:13:42A look at the need for high-voltage substations using high-accuracy integrated automation systems.
2020-04-26 14:56:02交通运输应用中高压电池监控的隔离
2020-04-26 14:55:51在采样速率和可用带宽方面,当今的射频模数转换器(RF ADC)已有长足的发展。其中还纳入了大量数字处理功能,电源方面的复杂性也有提高。那么,当今的RF ADC为什么有如此多不同的电源轨和电源域?
2020-04-26 14:35:31多数中间总线转换器(IBC)通过大型变压器实现从输入端到输出端的隔离。它们一般还需要一个电感用于输出滤波。这类转换器通常用于数据通信、电信以及医疗分布式供电架构。
2020-04-26 14:33:43电子通信领域正迅速扩展到日常生活的各个方面。检测、传输和接收数据都需要使用大量器件,例如光纤传感器、RFMEMS、PIN二极管、APD、激光二极管、高压DAC等等。在许多情况下,这些器件需要几百伏的电压才能运行,因此需要使用DC-DC转换器,以满足严格的效率、空间和…
2020-04-26 14:33:10精密模拟设计人员常常依赖安静低噪声的基准电压源来为DAC和ADC转换器供电。这项任务不在基准电压源的基本职责范围内,其表面上的设计目的是为实际电源提供干净精确的稳定电压,即电源转换器的基准输入。
2020-04-26 14:32:51